Sewage Cleanup Service Cleanup and Disinfection

A sewage backup can be a nightmare, leaving behind a mess that is not only unpleasant but also potentially hazardous. Sewage contains bacteria and other contaminants that can pose a health risk, so it is important to clean up and disinfect the affected area as soon as possible.

Cleanup

1. Remove the source of the backup: If possible, turn off the water supply to the backed-up fixture.
2. Protect yourself: Wear gloves, goggles, and a mask when cleaning up sewage.
3. Remove standing water: Use a wet/dry vacuum or mop to remove as much standing water as possible.
4. Clean surfaces: Use a disinfectant cleaner to clean all surfaces that have come into contact with sewage.
5. Dispose of contaminated materials: Properly dispose of any materials that have been contaminated with sewage, such as rags, gloves, and masks.

Disinfection

1. Bleach solution: Mix 1 cup of bleach per gallon of water and apply it to all surfaces that have been cleaned.
2. Allow to sit: Allow the bleach solution to sit for at least 10 minutes before rinsing it off.
3. Rinse and dry: Rinse all surfaces with clean water and dry them thoroughly.

How do I get the sewer smell out of my house after a backup?

• Ventilate: Open all windows and doors to ventilate the area.
• Baking soda: Place bowls of baking soda around the affected area to absorb odors.
• Vinegar: Spray vinegar into the air or place bowls of vinegar around the affected area to neutralize odors.
• Activated charcoal: Place activated charcoal in bowls or containers around the affected area to absorb odors.

If the sewer smell persists, it is important to contact a professional sewage cleanup service. They have the experience and equipment to safely and effectively clean up and disinfect the affected area.